top of page

Tread Tapping

Straight Slot Thread Taps Drill Bits are engineered with precision for creating straight slots in various materials. Ideal for woodworking, metalworking, and plastic fabrication, these taps ensure clean and accurate slotting operations.

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

There are several types of thread taps, including:

1. Straight Flute Taps: These taps have straight flutes that run the full length of the tap. They are commonly used for general-purpose threading and are available in a variety of sizes and thread pitches.

2. Spiral Flute Taps: These taps have a spiral flute design that helps to evacuate chips and swarf more efficiently than straight flute taps . They are ideal for threading deep holes or hard-to-reach areas.

3. Bottoming Taps: These taps are designed to cut threads in the bottom of a blind hole. They have a shorter length and a smaller thread form than other taps , allowing them to reach the bottom of the hole without breaking.

4. Plug Taps: These taps are designed to cut threads in the upper portion of a blind hole. They have a longer length and a larger thread form than bottoming taps .

5. Form Taps: These taps are designed to create a specific threads form, such as a square or acme thread. They have a unique profile that matches the desired thread form.

When using threads taps , it is important to use the correct tap for the material being threaded and to follow proper taping techniques to ensure a successful thread is created. This includes using cutting oil or lubricant, using the correct speed and feed rate, and applying the proper torque. Additionally, it is important to clean the tap regularly during use to remove any chips or debris that may accumulate and cause damage to the tap or workpiece.

Straight Slot

Straight Slot

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Pipe Thread

Pipe Thread

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Forming Tap

Forming Tap

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Spiral Point

Spiral Point

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Extension Taps

Extension Taps

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Tips

Tips

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Squeeze

Squeeze

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Spiral Flute

Spiral Flute

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Combination Taps

Combination Taps

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Nut Taps

Nut Taps

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Screw Thread Inserts

Screw Thread Inserts

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Dental Cone

Dental Cone

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Thread Milling Cutters

Thread Milling Cutters

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

Acme Thread Tap

Acme Thread Tap

Thread Taps Drill Bits

Thread taps are cutting tools used to create internal threads in a hole. They are designed with a series of cutting edges along the length of the tap that remove material and create a thread form when the tap is rotated and advanced into a hole.

How to Buy

Request an Equipment  Quote   

Ready to buy stuff from Flexible,Request a quote now.

Buy

Browse Parts and equpments on our store

Reviews
Komentarze
Couldn’t Load Comments
It looks like there was a technical problem. Try reconnecting or refreshing the page.
bottom of page