top of page

For our Loop Diamond Wire Saw, it could be used for cutting the hybrid materials, such as ceramic mixed with iron, when cutting , the iron chips will be adhered onto the diamond surface, but at the same time, the ceramic materials will carry off the iron chip, so the hybrid materials is ok. If cutting the pure metal, after cutting some distance, the iron will be adhered onto the diamond surface and stop the diamond further cutting , so it is not fit for the big area cutting , small area pure metal is ok.

​The Loop diamond Wire Saw is the perfect solution for cutting low-stress, precision metal products that are expensive and made of delicate materials such as Teflon. It offers a small cutting force, narrow kerfs, and is difficult to crack, ensuring high cutting efficiency performance. At Flexible, we provide complete technical support and long-term assistance to meet our customers' needs. We also offer personalized recommendations for diamond wire Loop that work seamlessly with the diamond wire Saw. With us, you can rest assured that your cutting needs will be met with the utmost precision and care.

  1. Select the Appropriate Wire Size: Choose a wire size that matches the thickness of the metal being cut. Larger wire s cut faster but may generate more heat, while smaller wires offer greater accuracy.

  2. Adjust the Wire Speed: Tailor the wire speed to the thickness of the metal. Slower speeds produce less heat and cleaner cuts, while faster speeds cut quicker but may generate more heat.

  3. Apply Cutting Oil: Lubricate both the wire and the metal with cutting oil to minimize friction, prevent overheating, and facilitate smoother cuts.

  4. Maintain a Steady Feed Rate: Keep a consistent feed rate to ensure uniform cutting and prevent the wire from binding or skipping.

  5. Monitor Wire Condition: Regularly inspect the wire 's condition and replace it when necessary to maintain cutting effectiveness and prevent breakage.

  6. Wear Safety Gear: Always use appropriate safety gear, including goggles and gloves, to protect against debris and potential injuries.

How to Buy

Request an Equipment  Quote   

Ready to buy stuff from Flexible,Request a quote now.


Browse Parts and equpments on our store

Couldn’t Load Comments
It looks like there was a technical problem. Try reconnecting or refreshing the page.

Q: What are the most common types of drilling method?

Here are the five common types of oil drilling techniques. 1. Cable Drilling. 2. Directional Drilling. 3. Electro-Drilling. 4. Rotary Drilling. 5. Dual-Wall Reverse- 6. Circulation Drilling.

Q: How deep can a drill rig go?

Depending on the rig type, offshore rigs are rated to drill in water depths as shallow as 80 feet to as great as 12,000 feet. The greatest water depth a jackup can drill in is 550 feet, and many newer units have a rated drilling depth of 35,000 feet.

Q: What is the process of oil exploration?

Oil and gas exploration encompasses the processes and methods involved in locating potential sites for oil and gas drilling and extraction. Early oil and gas explorers relied upon surface signs like natural oil seeps, but developments in science and technology have made oil and gas exploration more efficient.

Q: What are the positions on a rig?

Diver – Some rigs require the use of divers to maintain the underwater equipment. Driller – Heads up all operations related to the drilling equipment. Electrician – Maintains and repairs all electrical systems onboard the rig. Floorman – Provides general support to the rig's drilling operations.

bottom of page