top of page

Sapphire Cut with diamond Loop Wire Saw

When cutting sapphire, a fine diamond wire is commonly used to move back and forth at a slow speed. However, using a Loop diamond wire with a larger diameter and length can significantly reduce cutting time. Our diamond Coated wire Loop with a diameter of 0.7mm and a length of 4000mm can cut a 2-3 inch sapphire in just 30 minutes with a speed of 20m/s. To further optimize the cutting process, it's essential to use the correct settings for the specific sapphire material, such as adjusting the wire speed, feed rate, and coolant flow. Additionally, regularly monitoring the wire's condition and replacing it as needed ensures the best cutting results and prevents wire breakage. Overall, using a diamond Coated wire Loop can significantly improve cutting efficiency and reduce the time required to cut sapphire.
To use the diamond Coated wire Loop, follow these steps:
1. Mount the sapphire onto a cutting machine and secure it in place.
2. Attach the diamond Coated wire  Loop to the cutting machine.
3. Adjust the machinesettings to the recommended speed and tension for the wire Loop.
4. Begin cutting the sapphire with the wire Loop, moving it back and forth across the surface.
5. Monitor the cutting process to ensure the desired thickness and surface finish is achieved.
With this method, the surface finish achieved is between 0.473-0.7μm. Our team offers complete technical and long-term support to our customers, including personalized recommendations for their specific needs. Contact us for more information on our diamond Coated wire Loopand how it can improve your sapphire cutting process.

How to Buy

Request an Equipment  Quote   

Ready to buy stuff from Flexible,Request a quote now.

Buy

Browse Parts and equpments on our store

Reviews
Comentários
Nem sikerült betölteni a hozzászólásokat
Úgy tűnik, műszaki hiba történt. Próbálj újra csatlakozni, vagy frissítsd az oldalt!
FAQ

Q: What are the most common types of drilling method?

Here are the five common types of oil drilling techniques. 1. Cable Drilling. 2. Directional Drilling. 3. Electro-Drilling. 4. Rotary Drilling. 5. Dual-Wall Reverse- 6. Circulation Drilling.

Q: How deep can a drill rig go?

Depending on the rig type, offshore rigs are rated to drill in water depths as shallow as 80 feet to as great as 12,000 feet. The greatest water depth a jackup can drill in is 550 feet, and many newer units have a rated drilling depth of 35,000 feet.

Q: What is the process of oil exploration?

Oil and gas exploration encompasses the processes and methods involved in locating potential sites for oil and gas drilling and extraction. Early oil and gas explorers relied upon surface signs like natural oil seeps, but developments in science and technology have made oil and gas exploration more efficient.

Q: What are the positions on a rig?

Diver – Some rigs require the use of divers to maintain the underwater equipment. Driller – Heads up all operations related to the drilling equipment. Electrician – Maintains and repairs all electrical systems onboard the rig. Floorman – Provides general support to the rig's drilling operations.

bottom of page